Jigs and fixtures
Computer Desk with Triangular Stands
- Bounding box
- 1200.0 × 700.0 × 750.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
I would love to design a computer desk which has special design - i will attach a image. The table should fit one computer, monitor, keyboard and mouse. The table height should be near to 75cm so it is comfortable to sit and use the table. 120cm wide, horizontal support which makes the table stable (support should be in the back). The stands will be made from triangles that will be attached together like in the reference picture. One piece is 66cm and the other two that creates one triangle are 53cm. We need to figure out the angle i should cut the parts.
Parameters
| Name | Value | Range |
|---|---|---|
| Tabletop Width | 1200 mm | 600 – 2000 |
| Tabletop Depth | 700 mm | 400 – 1200 |
| Tabletop Thickness | 25 mm | 10 – 60 |
| Tabletop Height | 750 mm | 500 – 1000 |
| Front Edge Fillet | 8 mm | 0 – 20 |
| Stand Inset from Edge | 100 mm | 0 – 300 |
| Strut Width (X) | 50 mm | 20 – 100 |
| Strut Thickness | 30 mm | 10 – 80 |
| Base Strut Length | 660 mm | 400 – 1200 |
| Base End Miter Angle | 64.3 deg | 30 – 80 |
| Rear Stabilizer Length | 1100 mm | 600 – 1800 |
| Rear Stabilizer Width | 50 mm | 20 – 100 |
| Rear Stabilizer Thickness | 30 mm | 10 – 80 |
| Rear Stabilizer Y Position | 290 mm | 0 – 450 |
| Rear Stabilizer Z Position | 150 mm | 0 – 600 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
