Mechanical parts
Collar core (parts 12-16)
- Bounding box
- 46.0 × 46.0 × 170.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Smart acetabular reamer, parts 12-16 in assembled positions (global coordinates): collar hub, two bushings, collar tube, SmCo ring magnet and end cap, return spring. Revision: radial cable hole moved off the cavity floor plane so it no longer touches it tangentially.
Parameters
| Name | Value | Range |
|---|---|---|
| Hub rear face (Z) | 290 mm | 250 – 310 |
| Hub body diameter | 32 mm | 28 – 40 |
| Hub length | 28 mm | 24 – 36 |
| Arm track flange diameter | 46 mm | 40 – 54 |
| Flange thickness | 8 mm | 6 – 10 |
| Bushing bore | 8.05 mm | 8 – 8.2 |
| Bushing length | 6 mm | 4 – 8 |
| Collar tube OD | 14 mm | 12 – 15 |
| Collar tube ID | 10 mm | 9 – 11 |
| Collar tube length | 100 mm | 80 – 120 |
| Magnet length | 4 mm | 2 – 6 |
| Spring OD | 12.5 mm | 11 – 12.9 |
| Spring wire diameter | 0.7 mm | 0.4 – 1 |
| Spring total coils | 10 | 6 – 14 |
| Spring rear seat (Z) | 148 mm | 140 – 160 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.
