Mechanical parts
Clevis Pin Joint Assembly
- Bounding box
- 100.0 × 75.0 × 74.0 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
can you make a clevis pin design using the image as reference and use this values for the design P = 25 kN = 25,000 N d = 30 mm (Ø30 f7) t = 24 mm (blade / center lug thickness) b = 12 mm (each clevis prong thickness) 2b = 24 mm (total prong thickness) c = 2 shear planes (between blade and each prong) V = P/2 = 12.5 kN (shear force per plane c) Bearing stress = P/(td) = 34.72 MPa Gap between prongs = 24 mm Overall clevis width across prongs = 48 mm Prong width, W = 75 mm Hole center to prong end, e = 45 mm (R45 end) Clevis hole = Ø30 H8 Pin overall length = 68 mm Pin head = Ø45 × 8 mm thick Pin grip length (b + t + b) = 48 mm Cotter hole = Ø5, 6 mm from free end Shank = Ø30 with M24 × 3 thread
Parameters
| Name | Value | Range |
|---|---|---|
| Prong Width W | 75 mm | 40 – 140 |
| Prong Thickness b | 12 mm | 6 – 30 |
| Gap Between Prongs | 24 mm | 10 – 60 |
| Clevis Hole Ø (H8) | 30 mm | 10 – 60 |
| Hole Centre From Tip | 45 mm | 20 – 100 |
| Rounded End Radius R | 45 mm | 20 – 120 |
| Body Behind Hole | 55 mm | 20 – 120 |
| Slot Depth Behind Hole | 30 mm | 5 – 80 |
| Slot Root Fillet | 4 mm | 0.5 – 6 |
| Lug Thickness t | 24 mm | 8 – 60 |
| Lug Width | 60 mm | 30 – 120 |
| Pin Shank Ø (f7) | 30 mm | 12 – 60 |
| Pin Overall Length | 68 mm | 40 – 150 |
| Head Ø | 45 mm | 25 – 90 |
| Head Thickness | 8 mm | 3 – 25 |
| Grip Length (b+t+b) | 48 mm | 20 – 120 |
| Thread Ø (M24 core) | 24 mm | 10 – 60 |
| Cotter Hole Ø | 5 mm | 2 – 12 |
| Cotter Hole From End | 6 mm | 3 – 25 |
| Cotter Pin Ø | 5 mm | 2 – 12 |
| Cotter Pin Length | 35 mm | 15 – 70 |
| Bent Leg Length | 12 mm | 4 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.