Fittings and adapters
Circular Reducer Nozzle
- Bounding box
- 20 × 20.0 × 40 mm
- Engine
- 3D Printing B-rep
- Parameters
- 6
- Published
- November 21, 2026
Download
Free to download and use. See the terms.
The prompt
A nozzle with two circular ends. One end is 20mm and the other is 5mm. The length is 40mm
Parameters
| Name | Value | Range |
|---|---|---|
| Large End Outer Diameter | 20 mm | 10 – 100 |
| Small End Outer Diameter | 5 mm | 3 – 40 |
| Total Length | 40 mm | 15 – 150 |
| Wall Thickness | 1.4 mm | 0.8 – 4 |
| Straight Base Length | 8 mm | 0 – 30 |
| Straight Tip Length | 4 mm | 0 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Modular Pyramid Rod Section
Design a 3D-printable modular tubular rod section for a portable, modular Great Pyramid of Giza wireframe. DIMENSIONS: - External diameter: 30 mm. - Internal diameter: 22 mm. - Wa
Thorlabs SM1T2 Double-Male SM1 Adapter
I need a thorlabs SM1T2 adapter. Its an Sm1 to Sm1 adapter. The threading should be external
SM1 to SM1 Male-Male Adapter
I need an SM1 to SM1 threaded adapter. the treads should be external
Laminar Jet Hose Nozzle
I need a 3d printable hose lock compatible water nozzle which produces a laminar jet
Sticker roll spool
Units: mm. New separate part: a spool for one sticker roll, printed standing on its flange. Variables: liner_w = 50, core_d = 14, bore_d = 7.8, flange_d = 24, flange_t = 1.2, core_
