3D preview of Sticker roll spool
Loading the interactive model…
Interactive 3D model of Sticker roll spool

Fittings and adapters

Sticker roll spool

1 views
Bounding box
23.9 × 24 × 51.8 mm
Engine
3D Printing B-rep
Parameters
12
Published
November 18, 2026

Download

Free to download and use. See the terms.

The prompt

Units: mm. New separate part: a spool for one sticker roll, printed standing on its flange. Variables: liner_w = 50, core_d = 14, bore_d = 7.8, flange_d = 24, flange_t = 1.2, core_len = liner_w + 0.6. - Tube: outer diameter core_d, length core_len, with a bore_d hole through the whole part (tube and flange). Chamfer the hole entrance at the open end of the tube by 0.6 mm. - Flange: a disk, diameter flange_d, thickness flange_t, at the other end of the tube. Cut 18 evenly spaced half-round notches (radius 0.8) into its rim as a finger grip. - Slot for the end of the sticker strip: 0.9 mm wide, running the full tube length from the open end to the flange. In cross-section it lies along a chord 5.4 mm from the axis, starting at the outer surface and going 5.5 mm deep, so it never breaks into the bore.

Parameters

NameValueRange
Sticker liner width50 mm10 – 150
Extra tube length over liner width0.6 mm0 – 3
Tube outer diameter14 mm8 – 40
Through bore diameter7.8 mm3 – 30
Bore entrance chamfer at open end0.6 mm0 – 2
Flange diameter24 mm12 – 80
Flange thickness1.2 mm0.8 – 4
Number of grip notches18 mm0 – 48
Grip notch radius0.8 mm0.3 – 3
Slot width0.9 mm0.4 – 2
Slot chord distance from axis5.4 mm2 – 18
Slot depth from outer surface5.5 mm1 – 20

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

3D preview of SM1 to RMS Thread Adapter26.3 × 26.3 × 7.6 mmPrecision

SM1 to RMS Thread Adapter

thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.

STEPSTLGLB5 PARAMS
3D preview of Gutter Cleaning Wand8.9 × 70 × 42.5 mm3D Printing

Gutter Cleaning Wand

i want to make a tool to clean out floor gutters. the opening in the grid is 80mm by 10mm and the height from botom of the gutter to top of the grid is 45mm. so i need a flat curv

STLGLB13 PARAMS
3D preview of Compact Harmonic Drive Reducer (Robot Joint)476.0 × 58.7 × 34.5 mmPrecision

Compact Harmonic Drive Reducer (Robot Joint)

请设计一个用于机器人机械臂关节的紧凑型谐波减速器(Harmonic Drive Reducer)三维 CAD 模型。 **一、整体尺寸与结构要求** - 减速器主体外径约 50mm,目标控制在 45–50mm 范围内。 - 总成最大轴向厚度不超过 50mm,包含安装法兰和支撑脚。 - 整体结构紧凑、对称,适合安装在机器人机械臂关节位置。 - 允许在主体外壳

STEPSTLGLB56 PARAMS
3D preview of 1in Tool to 3/4in Hose Adapter30 × 30 × 49 mm3D Printing

1in Tool to 3/4in Hose Adapter

Create an adapter that can bridge a 1 inch ID tool to a .75 inch id flexible hose

STLGLB11 PARAMS
3D preview of Type-M Oxy-Fuel Heating Nozzle (Copper Head + Brass Hex Body)31.2 × 27.0 × 75.0 mmPrecision

Type-M Oxy-Fuel Heating Nozzle (Copper Head + Brass Hex Body)

Create a 3D CAD model and export it as a STEP file for a custom industrial heating nozzle (Type-M oxy-fuel cutting torch mixing head standard) based on the attached technical drawi

STEPSTLGLB19 PARAMS
3D preview of Type-M Compact Jumbo Multi-Flame Heating Nozzle32.0 × 32.0 × 54.0 mmPrecision

Type-M Compact Jumbo Multi-Flame Heating Nozzle

Create a compact, short, and heavy-duty custom heating nozzle (Type-M oxy-fuel standard) for metal melting, matching the physical proportions of the reference image. Strictly follo

STEPSTLGLB26 PARAMS
Sticker roll spool - Free CAD Model (STEP, STL) | TextoCAD