Jigs and fixtures
Circular NFC Tag Inlay
- Bounding box
- 15.0 × 15.0 × 0.2 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Create a circular NFC tag with a diameter of 1.5 cm and a thickness of 0.2 mm; inside the circle, a circuit pattern similar to that of a standard NFC tag is visible.
Parameters
| Name | Value | Range |
|---|---|---|
| Tag Diameter | 15 mm | 10 – 40 |
| Overall Thickness | 0.2 mm | 0.1 – 2 |
| Edge Margin | 1 mm | 0.3 – 2.5 |
| Coil Turns | 7 turns | 1 – 15 |
| Trace Width | 0.25 mm | 0.1 – 1 |
| Trace Gap | 0.25 mm | 0.1 – 1 |
| Copper Thickness | 0.06 mm | 0.02 – 0.3 |
| Crossover Angle | 90 deg | 0 – 360 |
| Chip Die Size | 1.2 mm | 0.5 – 3 |
| Chip Pocket Clearance | 0.1 mm | 0.02 – 0.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
