Mechanical parts
Chasis tubular sandrail dos plazas
- Bounding box
- 2825.0 × 1640.0 × 1446.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- September 15, 2026
Download
Free to download and use. See the terms.
The prompt
Crea un chasis tubular ligero para un buggy todo terreno de dos plazas, estilo sandrail, sin carrocería ni puertas. Estructura hecha con tubos de acero de un diámetro aproximado de 25 milímetros, formando un marco de protección tipo jaula antivuelco en la parte superior. Base rectangular con un largo aproximado de 2.8 metros y ancho de 1.5 metros, con soportes transversales para motor trasero, dos asientos delanteros, volante y pedales, y anclajes de suspensión en las cuatro ruedas. Diseño simple, resistente y minimalista, sin armas ni elementos decorativos.
Parameters
| Name | Value | Range |
|---|---|---|
| Tubo diámetro exterior | 25 mm | 10 – 60 |
| Largo total | 2800 mm | 2000 – 3500 |
| Ancho total | 1500 mm | 1000 – 2200 |
| Altura jaula antivuelco | 1400 mm | 800 – 2000 |
| Travesaño delantero / pedales | 300 mm | 0 – 1000 |
| Soporte asiento delantero | 950 mm | 500 – 1600 |
| Soporte asiento trasero | 1350 mm | 700 – 1800 |
| Soporte motor trasero 1 | 2400 mm | 1800 – 2750 |
| Soporte motor trasero 2 | 2600 mm | 1800 – 2800 |
| Frente jaula antivuelco | 700 mm | 400 – 1500 |
| Parte trasera jaula | 2200 mm | 1200 – 2700 |
| Saliente anclaje suspensión | 70 mm | 0 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.