Brackets and mounts
CB70W Helmet Side Rail Camera Mount
- Bounding box
- 64.1 × 38 × 23 mm
- Engine
- 3D Printing B-rep
- Parameters
- 20
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
I would like you to generate a camera mount for a CB70W camera, designed for my tactical helmet. It should attach via the side rail, be as low-profile as possible, and allow for orientation adjustment.
Parameters
| Name | Value | Range |
|---|---|---|
| Rail width | 21.2 mm | 15 – 30 |
| Rail height | 6 mm | 3 – 12 |
| Clamp wall thickness | 3.5 mm | 2 – 6 |
| Clamp length along rail | 38 mm | 20 – 70 |
| Shelf thickness | 5 mm | 3 – 8 |
| Shelf width | 24 mm | 16 – 40 |
| Camera plate length | 44 mm | 30 – 70 |
| Camera plate width | 32 mm | 20 – 60 |
| Camera plate thickness | 5 mm | 3 – 8 |
| Pivot offset from clamp centre | 10 mm | 5 – 20 |
| Lock screw offset from clamp centre | 24 mm | 15 – 35 |
| Camera screw offset from clamp centre | 36 mm | 25 – 60 |
| Camera screw clearance | 6.6 mm | 5 – 9 |
| Threaded insert pocket diameter | 8.2 mm | 6 – 12 |
| Threaded insert pocket depth | 4 mm | 2 – 6 |
| M4 clearance hole | 4.5 mm | 3.4 – 5.5 |
| M3 clearance hole | 3.4 mm | 2.5 – 5 |
| Set screw spacing | 12 mm | 5 – 20 |
| Lock slot width | 5.2 mm | 4 – 7 |
| Lock slot length | 18 mm | 8 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and