Mechanical parts
Car Motor Shaft
- Bounding box
- 36 × 36 × 98 mm
- Engine
- 3D Printing B-rep
- Parameters
- 18
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Car motor shaft detailed
Parameters
| Name | Value | Range |
|---|---|---|
| Main shaft diameter | 10 mm | 8 – 20 |
| Output end length | 25 mm | 10 – 60 |
| Bearing journal diameter | 15 mm | 12 – 30 |
| Bearing journal length | 10 mm | 6 – 25 |
| Rotor outer diameter | 36 mm | 25 – 80 |
| Rotor stack length | 28 mm | 10 – 60 |
| Rotor slot count | 8 mm | 4 – 16 |
| Rotor slot diameter | 4 mm | 2 – 8 |
| Rotor slot pitch-circle diameter | 23 mm | 15 – 50 |
| Threaded end diameter | 8 mm | 6 – 16 |
| Threaded end length | 15 mm | 6 – 30 |
| Key width | 3 mm | 3 – 8 |
| Key height | 3 mm | 3 – 8 |
| Key length | 16 mm | 8 – 40 |
| Nut across flats | 13 mm | 10 – 30 |
| Nut height | 6.5 mm | 4 – 15 |
| Radial fit clearance | 0.2 mm | 0.1 – 0.6 |
| Key slot clearance | 0.2 mm | 0.1 – 0.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.
