Mechanical parts
Cable 2x0.50 mm² Flat Sheath with Cable Gland
- Bounding box
- 180 × 16.2 × 14 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
https://conducablesrl.com.ar/wp-content/uploads/2025/03/ConducableSRL_CATALOGO_MARZO_2025.pdf podrias dibujarme un CABLE 2 X 0,50 MM NEGRO VAINA CHATA con Pasacables
Parameters
| Name | Value | Range |
|---|---|---|
| Overall cable length | 180 mm | 60 – 400 |
| Flat sheath width | 8 mm | 4 – 20 |
| Flat sheath thickness | 3 mm | 1.5 – 8 |
| Insulated core diameter | 2 mm | 1 – 4 |
| Core centre spacing | 4 mm | 1.5 – 12 |
| Stripped end length | 22 mm | 6 – 60 |
| Gland position along cable | 105 mm | 10 – 350 |
| Hex nut across flats | 14 mm | 9 – 30 |
| Hex nut length | 6 mm | 3 – 20 |
| Gland body diameter | 12 mm | 9 – 30 |
| Gland body length | 7 mm | 3 – 30 |
| Cap large diameter | 13 mm | 9 – 32 |
| Cap length | 8 mm | 3 – 30 |
| Bore clearance, total | 0.5 mm | 0.2 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.