733 models

Brackets and mounts

L-brackets, wall mounts, clamps and holders generated from text prompts. Every one shows the prompt that made it and downloads as STEP or STL.

Page 29 of 31

194 × 178 × 42 mm3D Printing

Frame Drone 5 inch X + Slot GPS Belakang

Adjusted Frame Drone 5 inch X + Slot GPS Belakang: motor_x=85, motor_y=77, mount_pad=24

STLGLB38 PARAMS
3D preview of TILT-X1 Wing, Ailerons and Tilt Nacelles v3223.5 × 1204 × 46 mm3D Printing

TILT-X1 Wing, Ailerons and Tilt Nacelles v3

CONVERT TILT NICELLE AS ONE SIDED CYLINDER OTHER SIDE AS FLAT SO MOTOR MOUNT CAN CONNECT ESSAILY

STLGLB12 PARAMS
136.6 × 111.1 × 86.8 mm3D Printing

Trappeholder til Makera-fræserrør

Opbevaring til Makera-fræserrør (12,9 x 12,9 mm, 67 mm lange med hætte), så de kan sættes ned i og tages let frem. Trappeholder med hældende lommer, 4 rækker á 8.

STLGLB10 PARAMS
100 × 56 × 25.8 mm3D Printing

Remote Control Visor / Wall Clip

The Alutech remote control clip can be attached to a vehicle's sun visor or a wall and is designed specifically for a particular remote model (for example, the AT-4N, AT-4, or AT-4

STLGLB14 PARAMS
3D preview of 3-Disc Pill Singulation Dispenser (Vertical Discs)220 × 145.2 × 121.5 mm3D Printing

3-Disc Pill Singulation Dispenser (Vertical Discs)

1. The Horizontal Disc Problem In your CAD, the blue singulation discs are lying completely flat (horizontally) directly above the collection tray. If a pill drops from the yellow

STLGLB26 PARAMS
90 × 202 × 12 mm3D Printing

Remembrance Poppy Grave Flag Stake

Ground-stake flag holder for Canadian Remembrance Day, 10x6 inch flags, medallion changed to a poppy

STLGLB8 PARAMS
186.8 × 202.3 × 239.0 mm3D Printing

Deer Head Whiskey Bottle Holder

Make a whiskey bottle holder in the shape of a deer's head.

STLGLB14 PARAMS
400 × 300 × 335 mm3D Printing

Eddy Current Brake Test Rig

Eddy current brake test rig: 400x200x10 baseplate, 10 mm shaft on two pillow blocks, 300x5 mm rotor disc, adjustable U-shaped caliper bracket with air gap on each side, parametric.

STLGLB36 PARAMS
14.3 × 4.6 × 7 mm3D Printing

Threaded clamp pin and hex nut

Custom printable threaded pin (short, 6 mm under the head) with a matching hex nut, replacing the M2 screw for the N20 motor clamp. Pin goes through the clamp foot (2 mm) and chass

STLGLB11 PARAMS
100 × 100 × 57 mm3D Printing

Elegoo Saturn 4 / Mars 5 Magnetic Exhaust Adapter

https://www.printables.com/model/1359288-elegoo-saturn-4mars-5-heater-exhaust-adapter Create a version of this that uses magnets for the connection between the adapter plate and t

STLGLB17 PARAMS
150 × 80 × 8.0 mm3D Printing

26in Bicycle Engine Mount Bracket

Create a mechanical engine mounting bracket for a 26-inch bicycle. Dimensions: 150 mm length, 80 mm width, 5 mm steel thickness, with four mounting holes. Create an editable parame

STLGLB13 PARAMS
86.3 × 76.5 × 174.1 mm3D Printing

Nothing Phone 4a Bicycle Handlebar Holder

Three-part FDM-PLA bicycle phone holder: phone cradle body with four retaining claws on each edge, connecting mount, and 22.2 mm handlebar clamp. Fixed phone slot is a nominal fit

STLGLB14 PARAMS
126 × 175 × 600 mm3D Printing

Compression Testing Tower

The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be

STLGLB26 PARAMS
14 × 14 × 32.8 mm3D Printing

3.5 mm Audio Extender Protective Sleeve

Design a 3D-printable, one-piece, hollow protective sleeve for an existing 3.5 mm female audio extender. Use millimeters. DIMENSIONS: * Total length: 32.75 mm, including flange.

STLGLB7 PARAMS
2000 × 1420 × 1800 mm3D Printing

Mobile Bird Aviary 2000x1200x1800

A professional heavy-duty mobile bird aviary/flight cage for cockatiels, combining structural strength and aesthetics. - Overall External Dimensions: Length 200 cm, Depth 120 cm,

STLGLB27 PARAMS
340 × 87 × 150 mm3D Printing

Steam Deck Pegboard Dock

Create a dock/stand/holder for a steamdeck that goes on a pegboard with 4mm holes and 25 mm pitch (distance between holes). The holder/ mount should have some extra space so that i

STLGLB17 PARAMS
3D preview of NEMA 34 L-Mounting Bracket99 × 106 × 80 mm3D Printing

NEMA 34 L-Mounting Bracket

write mach3 gcode for A standard NEMA 34 mounting bracket uses an 86.0 mm square motor interface with a Ø 73.0 mm central locating bore and four mounting holes arranged on a 98.4 m

STLGLB13 PARAMS
243.8 × 254 × 137.2 mm3D Printing

Shelf Extension Wing Bracket

Create a solid shelf extension wing bracket. The base 2D profile represents the front view and must be extruded into a 3D solid with a total depth of 10.0 inches. Every section of

STLGLB7 PARAMS
3D preview of Solar Panel Spray Manifold1150 × 58.1 × 34.6 mm3D Printing

Solar Panel Spray Manifold

Create a spray manifold and nozzle assembly for a solar panel cleaning robot. All dimensions in millimetres. The origin is the centre of the manifold tube. The tube axis is the X a

STLGLB28 PARAMS
60 × 80 × 8 mm3D Printing

Halyard Clip

One of these halyard clips

STLGLB8 PARAMS
205 × 160 × 95 mm3D Printing

Shelf Extension — Two Sets per Plate

Two no-drill half-inch shelf extension brackets with 9x7x3mm metal peg sockets and two locking wedges, separately laid out with generous spacing for Bambu Lab P1S/A1, print the pla

STLGLB7 PARAMS
90 × 71 × 130 mm3D Printing

Van Wall Ear Defender Cradle

Industrial 3D-printed wall-mounted holder for heavy-duty construction ear defenders, designed to be screwed inside a work van. Features a deep curved cradle with a high retaining l

STLGLB17 PARAMS
200 × 105 × 32.4 mm3D Printing

Trivoice Flat Locking Enclosure - Watertight Component Holder Base

200x105x31mm wider Trivoice enclosure with 170x60 breadboard holder, ESP32 and DFPlayer cradles, relay and small-module holders, integrated lid posts, four upward-facing buttons an

STLGLB22 PARAMS
196.8 × 179.8 × 34 mm3D Printing

Frame Drone 5 inch Stretched (Motor 1503, FC 30.5, Spacer)

Frame drone 5 inch stretched X lebih panjang dan ramping, motor 1503 (12x12 M2), mounting FC 30.5x30.5, bottom plate dan top plate dipisah dengan 8 spacer

STLGLB20 PARAMS

Showing 24 of 733 models

Show 50 more

Describe a part, get a model

Write your own description and export STEP or STL when it looks right. Adjusting dimensions afterwards never costs a generation.