Mechanical parts
Butt Hinge Assembly
- Bounding box
- 80.0 × 12.0 × 100.0 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- October 17, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D mechanical butt hinge assembly. Overall height 100 mm. Two rectangular leaves, each 40 mm wide and 4 mm thick. Add 5 mm diameter screw holes, 3 holes per leaf. Add a central cylindrical barrel with 12 mm outer diameter, divided into 5 alternating knuckles. Add a 5 mm diameter hinge pin through the barrel. Keep all parts geometrically aligned and export as STEP.
Parameters
| Name | Value | Range |
|---|---|---|
| Leaf Width | 40 mm | 20 – 120 |
| Leaf Height | 100 mm | 30 – 300 |
| Leaf Thickness | 4 mm | 1 – 12 |
| Screw Hole Diameter | 5 mm | 1 – 12 |
| Screw Hole Edge Offset | 25 mm | 5 – 45 |
| Knuckle Length | 20 mm | 5 – 60 |
| Knuckle Outer Diameter | 12 mm | 6 – 40 |
| Pin Diameter | 5 mm | 2 – 12 |
| Pin Length | 100 mm | 20 – 400 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.