Mechanical parts
Brida ISO DN50
- Bounding box
- 120.0 × 120.0 × 17.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- September 18, 2026
Download
Free to download and use. See the terms.
The prompt
Puede darme el dibujo
Parameters
| Name | Value | Range |
|---|---|---|
| Diámetro exterior | 120 mm | 40 – 400 |
| Espesor del disco | 15 mm | 4 – 60 |
| Agujero central (paso) | 50 mm | 5 – 300 |
| Diámetro cara elevada | 70 mm | 10 – 300 |
| Altura cara elevada | 2 mm | 0 – 10 |
| Diámetro círculo de pernos | 90 mm | 20 – 350 |
| Diámetro agujero de perno | 11 mm | 2 – 40 |
| Número de pernos | 4 u | 3 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.