Mechanical parts
Brass Hook Latch (Hook Half)
- Bounding box
- 26.0 × 12.0 × 19.6 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- October 28, 2026
Download
Free to download and use. See the terms.
The prompt
Let them design these hinges.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length | 26 mm | 14 – 60 |
| Plate Width | 12 mm | 7 – 30 |
| Plate Thickness | 2.5 mm | 1 – 6 |
| Corner Radius | 5.5 mm | 0.5 – 14 |
| Screw Hole Dia | 3.4 mm | 1.5 – 8 |
| Hole Spacing | 19 mm | 6 – 50 |
| Hook Inner Radius | 5.5 mm | 2 – 20 |
| Hook Outer Radius | 9 mm | 3 – 30 |
| Arm Thickness | 4 mm | 1 – 12 |
| Arm Start Angle | 100 deg | 0 – 359 |
| Arm End Angle | 340 deg | 1 – 360 |
| Arc Center X | 0 mm | -15 – 15 |
| Arc Center Height | 10 mm | 3 – 30 |
| Tip Ball Dia | 5 mm | 1 – 14 |
| Pivot Boss Dia | 6 mm | 2 – 16 |
| Pivot Boss Height | 2.5 mm | 0.5 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.