Mechanical parts
Bracelet GPS Tracker
- Bounding box
- 80.3 × 66.0 × 16.8 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- September 23, 2026
Download
Free to download and use. See the terms.
The prompt
Make a high Transport project this project works following steps, A Bracelet size device send our Longitude, Latitude Location to a Drone, and this drone only few minutes Reached received longitude, latitude location, bracelet
Parameters
| Name | Value | Range |
|---|---|---|
| Band Inner Diameter | 60 mm | 40 – 90 |
| Band Width | 12 mm | 6 – 25 |
| Band Wall Thickness | 3 mm | 1.5 – 6 |
| Opening Gap Width | 8 mm | 3 – 15 |
| Electronics Pod Length | 20 mm | 16 – 35 |
| Electronics Pod Height | 10 mm | 5 – 20 |
| SIM Slot Width | 10 mm | 6 – 18 |
| SIM Slot Thickness | 1 mm | 0.4 – 3 |
| SIM Slot Depth | 5 mm | 2 – 10 |
| GPS Antenna Diameter | 8 mm | 4 – 12 |
| GPS Antenna Height | 3 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.