Mechanical parts
BOMBARDICUZ Mk I - GA37RG Cradle with Two-Bolt Cap
- Bounding box
- 70 × 68.6 × 51.7 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Update the GA37RG motor cradle with two vertical M3 insert pockets at the top shoulders and a matching removable bridge cap secured by two screws.
Parameters
| Name | Value | Range |
|---|---|---|
| Motor and gearbox diameter | 37 mm | 36 – 40 |
| Approximate motor assembly length | 66.6 mm | 60 – 75 |
| Motor clearance | 0.6 mm | 0.2 – 1.5 |
| Base length | 70 mm | 60 – 90 |
| Base width | 50 mm | 40 – 65 |
| Base thickness | 6 mm | 5 – 10 |
| M4 chassis mounting holes | 4.5 mm | 3.4 – 6 |
| Mounting hole spacing lengthwise | 50 mm | 40 – 60 |
| Mounting hole spacing across base | 30 mm | 20 – 40 |
| Cap bridge thickness | 5 mm | 4 – 8 |
| M3 cap screw clearance | 3.4 mm | 3.2 – 4 |
| Heat-set insert pocket diameter | 4.6 mm | 4.2 – 5.5 |
| Heat-set insert pocket depth | 5.5 mm | 4 – 7 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.