Mechanical parts
Binding Post, Spring Loaded
- Bounding box
- 30 × 30 × 51 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Binding Post, Spring Loaded
Parameters
| Name | Value | Range |
|---|---|---|
| Upper post diameter | 20 mm | 14 – 40 |
| Post height above flange | 28 mm | 16 – 50 |
| Flange diameter | 30 mm | 20 – 60 |
| Flange thickness | 3 mm | 1 – 8 |
| Lower shaft diameter | 10 mm | 6 – 20 |
| Lower shaft length | 16 mm | 6 – 30 |
| Nut diameter | 16 mm | 10 – 30 |
| Nut height | 6 mm | 3 – 10 |
| Wire hole diameter | 4 mm | 2 – 8 |
| Wire hole inset from top | 7 mm | 3 – 15 |
| Plunger cap diameter | 24 mm | 18 – 40 |
| Plunger cap thickness | 4 mm | 2 – 10 |
| Plunger travel | 5 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.