Brackets and mounts
Bike Bag Holder Box with Detached Mount Block
- Bounding box
- 258 × 332 × 79 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 12, 2026
Download
Free to download and use. See the terms.
The prompt
Separate the bottom mounting block from the main open-top storage box so they are two distinct, non-overlapping solid parts lying flat side by side on the build plate (Z = 0). Keep the bottom exterior surface of the box completely flat and smooth where the mounting block was attached. Modify the inner through-channel of the detached mounting block to have an exact square inner cross-section of 37 mm x 37 mm while maintaining solid outer walls (at least 6 mm thick on all sides). Keep all other dimensions and drainage holes unchanged.
Parameters
| Name | Value | Range |
|---|---|---|
| Inside length | 250 mm | 100 – 400 |
| Inside width | 250 mm | 100 – 400 |
| Inside wall height | 75 mm | 30 – 200 |
| Wall thickness | 4 mm | 1.2 – 8 |
| Bottom plate thickness | 4 mm | 1.2 – 8 |
| Rolled top rim lip width | 0 mm | 0 – 10 |
| Drain hole diameter | 8 mm | 2 – 12 |
| Max hole spacing | 22 mm | 8 – 60 |
| Holes per row / column | 12 mm | 3 – 20 |
| Square tube inside size | 37 mm | 15 – 60 |
| Wall thickness | 6 mm | 1.2 – 12 |
| Block length | 100 mm | 40 – 200 |
| M6 clamp thread nominal dia | 6 mm | 3 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and