Mechanical parts
Batten Structure 9x2x4 m
- Bounding box
- 9040.0 × 2040.0 × 4040.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Draw a structure made of wooden battens with a 40x40mm cross-section. The overall dimensions are 2 meters in depth, 9 meters in width, and 4 meters in height. The spacing (pitch) between the battens must not exceed 100 cm in both width and depth, and a maximum of 2 meters in height. Calculate the total quantity of battens needed, assuming a maximum stock length of 4 meters per batten. Provide the cutting list, the total number of screws required for assembly, and the recommended type of screws. Ensure that every joint uses at least 2 screws
Parameters
| Name | Value | Range |
|---|---|---|
| Batten side (square) | 40 mm | 10 – 100 |
| Overall width | 9000 mm | 1000 – 20000 |
| Overall depth | 2000 mm | 500 – 5000 |
| Overall height | 4000 mm | 1000 – 8000 |
| Number of width bays | 9 | 1 – 50 |
| Number of depth bays | 2 | 1 – 20 |
| Number of horizontal tier levels | 3 | 2 – 10 |
| Maximum available batten length | 4000 mm | 500 – 6000 |
| Screw shank diameter | 4.5 mm | 3 – 8 |
| Screw head diameter | 9 mm | 6 – 16 |
| Countersink angle | 90 ° | 60 – 120 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.