Jigs and fixtures
Axial-flux windmill generator – stator mould & coil jig
- Bounding box
- 281.4 × 216.4 × 16.1 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Adjusted Axial-flux windmill generator – stator mould & coil jig: stator_id=76
Parameters
| Name | Value | Range |
|---|---|---|
| Stator thickness | 10 mm | 6 – 16 |
| Stator diameter | 200 mm | 150 – 205 |
| Stator centre hole | 76 mm | 30 – 80 |
| Coil circle radius | 62 mm | 40 – 90 |
| Coils | 9 | 6 – 18 |
| Coil outer diameter | 42 mm | 25 – 60 |
| Coil inner diameter | 19 mm | 10 – 30 |
| Coil thickness | 8.5 mm | 4 – 14 |
| Bolt pin radius | 90 mm | 82 – 100 |
| Bolt pin diameter (M5) | 5.4 mm | 3 – 8 |
| Jig arbor bolt hole (M6) | 6.5 mm | 4 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
