Mechanical parts
Autonomous Crop-Scouting & Spraying Rover
- Bounding box
- 700.0 × 632.0 × 562.0 mm
- Engine
- Precision B-rep
- Parameters
- 32
- Published
- September 16, 2026
Download
Free to download and use. See the terms.
The prompt
a rover which will move through the farm and capture picture of the plants and compare them with the pre-existing data of diseased crops on Raspberry pi and give a notification to the farmer requesting about spraying the pestisite and once the request is approved the pesticite related to the disease will automatically be sprayed on the crop
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis Length | 600 mm | 300 – 1000 |
| Chassis Width | 400 mm | 200 – 700 |
| Chassis Height | 120 mm | 60 – 300 |
| Ground Clearance | 60 mm | 30 – 65 |
| Corner Fillet Radius | 15 mm | 0 – 40 |
| Wheel Diameter | 150 mm | 80 – 240 |
| Wheel Width | 60 mm | 30 – 120 |
| Wheelbase | 420 mm | 200 – 700 |
| Track (Axle Span) | 480 mm | 300 – 800 |
| Axle Diameter | 30 mm | 10 – 60 |
| Mast Diameter | 50 mm | 20 – 100 |
| Mast Height Above Deck | 300 mm | 100 – 600 |
| Camera Housing Width | 120 mm | 60 – 250 |
| Camera Housing Depth | 100 mm | 50 – 250 |
| Camera Housing Height | 90 mm | 40 – 200 |
| Lens Barrel Diameter | 50 mm | 20 – 120 |
| Lens Barrel Length | 40 mm | 10 – 120 |
| Pi Enclosure Width | 260 mm | 120 – 380 |
| Pi Enclosure Length | 200 mm | 100 – 400 |
| Pi Enclosure Height | 90 mm | 40 – 200 |
| Vent Slot Count | 5 count | 1 – 12 |
| Vent Slot Width | 14 mm | 5 – 30 |
| Vent Slot Length | 140 mm | 40 – 300 |
| Tank Diameter | 160 mm | 60 – 300 |
| Tank Length | 220 mm | 80 – 400 |
| Boom Post Diameter | 24 mm | 10 – 50 |
| Boom Tube Diameter | 30 mm | 12 – 60 |
| Boom Length | 700 mm | 300 – 1200 |
| Boom Height Above Deck | 220 mm | 100 – 400 |
| Nozzle Count | 5 count | 1 – 12 |
| Nozzle Diameter | 14 mm | 6 – 40 |
| Nozzle Length | 30 mm | 10 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.