Mechanical parts
Auger Screw
- Bounding box
- 6.1 × 3.0 × 5760.2 mm
- Engine
- Precision B-rep
- Parameters
- 5
- Published
- October 20, 2026
Download
Free to download and use. See the terms.
The prompt
auger fabrication drawing: 4 ft overall length, 3 in shaft, 9 in flight diameter, 3 in flight spacing, and a 15° pitch callout. I’ll treat “3 inches between flights” as the axial gap and show the 15° separately so both requirements are visible.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 48 in | 12 – 96 |
| Shaft Diameter | 3 in | 0.5 – 6 |
| Flight Diameter | 9 in | 4 – 18 |
| Flight Spacing (Pitch) | 3 in | 1.5 – 12 |
| Flight Thickness | 0.25 in | 0.125 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.