Enclosures and housings
Archaeological Diorama Terrain Base
- Bounding box
- 300.0 × 300.0 × 13.0 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 300 × 300 mm square archaeological diorama base representing an ancient South Asian archaeological site. This is a TERRAIN BASE ONLY. All large archaeological structures will be separate removable 3D prints and will be placed onto this base later. LAYOUT — TOP VIEW: Divide the base into four structure placement zones arranged in a 2 × 2 layout. ZONE 1: upper-left, approximately 100 × 100 mm. ZONE 2: upper-right, approximately 100 × 100 mm. ZONE 3: lower-left, approximately 90 × 90 mm. ZONE 4: lower-right, approximately 90 × 90 mm. Each zone must be a FLAT HORIZONTAL PLATFORM at the SAME HEIGHT as the surrounding terrain. They are NOT holes, pits, rooms, courtyards, or recessed areas. IMPORTANT: The four zones must have completely flat, clean surfaces with NO rocks, rubble, artifacts, walls, terrain features, or decorations on them. Leave enough empty space around each zone for separate structures to sit securely. Do NOT create walls, borders, raised edges, fences, pillars, or barriers around the placement zones. The zones should simply appear as clear flat patches of ground. Between and around the four zones, create realistic archaeological terrain: dry soil, small embedded rocks, scattered rubble, shallow cracks, erosion, small excavation marks, and several small partially buried artifacts. Keep all terrain details low and firmly connected to the base. Do not put large objects near the edges of the placement zones. Create one solid, watertight, closed mesh with a completely flat underside. Use thick, strong geometry suitable for FDM printing. Avoid fragile details, deep holes, floating geometry, disconnected objects, and complicated overhangs. No temples, buildings, walls, towers, columns, archways, stairs, statues, vehicles, people, or large architectural structures. Single isolated 300 × 300 mm base, centered, realistic archaeological excavation appearance.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 300 mm | 280 – 320 |
| Base Width | 300 mm | 280 – 320 |
| Base Thickness | 10 mm | 6 – 16 |
| Zone 1 X | -75 mm | -100 – -40 |
| Zone 1 Y | 75 mm | 40 – 100 |
| Zone 1 Width | 100 mm | 80 – 100 |
| Zone 1 Height | 100 mm | 80 – 100 |
| Zone 2 X | 75 mm | 40 – 100 |
| Zone 2 Y | 75 mm | 40 – 100 |
| Zone 2 Width | 100 mm | 80 – 100 |
| Zone 2 Height | 100 mm | 80 – 100 |
| Zone 3 X | -75 mm | -100 – -40 |
| Zone 3 Y | -75 mm | -100 – -40 |
| Zone 3 Width | 90 mm | 60 – 90 |
| Zone 3 Height | 90 mm | 60 – 90 |
| Zone 4 X | 75 mm | 40 – 100 |
| Zone 4 Y | -75 mm | -100 – -40 |
| Zone 4 Width | 90 mm | 60 – 90 |
| Zone 4 Height | 90 mm | 60 – 90 |
| Clear Zone Margin | 12 mm | 5 – 25 |
| Edge Clearance | 18 mm | 10 – 30 |
| Max Terrain Feature Height | 3 mm | 1.5 – 5 |
| Mound Count | 7 count | 0 – 25 |
| Rock Count | 20 count | 0 – 50 |
| Rubble Count | 14 count | 0 – 40 |
| Artifact Count | 10 count | 0 – 30 |
| Erosion Ridge Count | 8 count | 0 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox