Mechanical parts
Ammo Box Base with Grid, Hinge, Latch, and Padlock Bosses
- Bounding box
- 169.1 × 132.6 × 18.0 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
BASE OVERALL DIMENSIONS Overall Length: 169.1 mm Overall Width: 132.6 mm Overall Height: 18.0 mm BOTTOM Bottom Thickness: 3.0 mm SIDE WALLS Wall Thickness: 3.0 mm Inside Height: 15.0 mm Outside Height: 18.0 mm INSIDE CAVITY Inside Length: 163.1 mm Inside Width: 126.6 mm Pocket Depth: 12.5 mm CARTRIDGE GRID Rows: 5 Columns: 10 Pocket Length: 31.5 mm Pocket Width: 11.2 mm Pocket Depth: 12.5 mm Divider Thickness: 1.4 mm Corner Radius: 1.0 mm FRONT WALL Thickness: 3.0 mm Height: 18.0 mm SIDE WALLS Thickness: 3.0 mm Height: 18.0 mm REAR WALL Thickness: 3.0 mm Height: 18.0 mm Clearance Behind Hinge Rod: 3.0 mm HINGE BARRELS Four hinge barrels. Outside Diameter: 12.0 mm Rod Hole Diameter: 7.4 mm Barrel Length: 20.0 mm Gap Between Barrels: 10.0 mm Centerline Height: 8.0 mm Example layout: |20|10|20|10|20|10|20| FRONT SNAP LATCH RECEIVER Centered on front wall. Receiver Width: 28 mm Receiver Height: 8 mm Hook Depth: 4.5 mm Receiver Thickness: 3.2 mm PADLOCK BOSSES (BASE) Two vertical bosses. Quantity: 2 Outside Diameter: 24 mm Boss Thickness: 8 mm Hole Diameter: 4.5 mm Orientation: Vertical Interior: Flat BOSS LOCATION Measured from the outside edges. Center of Boss to Side Wall: 20 mm Center of Boss to Front Edge: 12 mm ___________________________________________ O LATCH O ___________________________________________
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 169.1 mm | 50 – 300 |
| Overall Width | 132.6 mm | 50 – 200 |
| Overall Height | 18 mm | 5 – 50 |
| Bottom Thickness | 3 mm | 1 – 10 |
| Wall Thickness | 3 mm | 1 – 10 |
| Inside Length | 163.1 mm | 40 – 280 |
| Inside Width | 126.6 mm | 40 – 180 |
| Pocket Depth | 12.5 mm | 1 – 20 |
| Pocket Length | 31.5 mm | 5 – 50 |
| Pocket Width | 11.2 mm | 5 – 30 |
| Pocket Depth | 12.5 mm | 1 – 20 |
| Divider Thickness | 1.4 mm | 0.5 – 5 |
| Corner Radius | 1 mm | 0.2 – 5 |
| Barrel Outside Diameter | 12 mm | 5 – 20 |
| Rod Hole Diameter | 7.4 mm | 2 – 15 |
| Barrel Length | 20 mm | 5 – 40 |
| Gap Between Barrels | 10 mm | 2 – 20 |
| Clearance Behind Hinge Rod | 3 mm | 0.5 – 10 |
| Hinge Centerline Height | 8 mm | 2 – 15 |
| Receiver Width | 28 mm | 10 – 60 |
| Receiver Height | 8 mm | 3 – 20 |
| Hook Depth | 4.5 mm | 1 – 10 |
| Boss Diameter | 24 mm | 8 – 40 |
| Boss Thickness | 8 mm | 2 – 15 |
| Padlock Hole Diameter | 4.5 mm | 2 – 8 |
| Center of Boss to Side Wall | 20 mm | 5 – 50 |
| Center of Boss to Front Edge | 12 mm | 2 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.