3D preview of Aluminium Tray with Finger & Corner Relief Notches
Loading the interactive model…
Interactive 3D model of Aluminium Tray with Finger & Corner Relief Notches

Jigs and fixtures

Aluminium Tray with Finger & Corner Relief Notches

1 views
Bounding box
300.0 × 220.0 × 11.0 mm
Engine
Precision B-rep
Parameters
12
Published
November 18, 2026

Download

Free to download and use. See the terms.

The prompt

Create a precision aluminium rectangular base tray. Exterior dimensions: 300mm wide, 220mm deep, 11mm tall. Wall thickness: 2.5mm on all four sides and base floor. Corner radius: 10mm on all four vertical corners. Interior floor is flat and smooth. Around the full interior perimeter where the floor meets the walls, add a 0.4mm × 45 degree chamfer. On the front long edge (300mm side), centered, machine a finger notch 30mm wide × 4mm deep with a 2mm radius at the bottom. In the top right corner of the interior rim add a small relief notch 15mm wide × 8mm deep × 4mm radius.

Parameters

NameValueRange
Exterior Width300 mm60 – 600
Exterior Depth220 mm60 – 600
Total Height11 mm6 – 100
Wall / Floor Thickness2.5 mm1 – 20
Vertical Corner Radius10 mm0.5 – 50
Floor Perimeter Chamfer0.4 mm0.1 – 2
Finger Notch Width30 mm5 – 150
Finger Notch Depth4 mm1 – 8
Finger Notch Bottom Radius2 mm0.5 – 6
Relief Notch Width15 mm3 – 80
Relief Notch Depth8 mm1 – 9
Relief Notch Radius4 mm0.5 – 8

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.