Mechanical parts
Adjustable Flat-Top Stool
- Bounding box
- 500.0 × 380.0 × 648.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- September 16, 2026
Download
Free to download and use. See the terms.
The prompt
Flat top stool, with a top 500mm by 380mm, straight legs that have four height settings. Top should have 30mm of foam. The legs need to be bolted to a square frame on the underside of the top.
Parameters
| Name | Value | Range |
|---|---|---|
| Top Length | 500 mm | 300 – 900 |
| Top Width | 380 mm | 250 – 700 |
| Top Substrate Thickness | 18 mm | 12 – 40 |
| Foam Cushion Thickness | 30 mm | 5 – 100 |
| Frame Outer Size (square) | 300 mm | 150 – 450 |
| Frame Rail Width | 40 mm | 20 – 80 |
| Frame Rail Height | 40 mm | 20 – 100 |
| Leg Square Section | 40 mm | 20 – 80 |
| Leg Length | 600 mm | 300 – 900 |
| Height Setting Pitch | 40 mm | 20 – 80 |
| Number of Height Settings | 4 off | 2 – 8 |
| Leg Bolt Hole Dia | 8 mm | 4 – 16 |
| Frame Screw Hole Dia | 5 mm | 3 – 10 |
| Cushion Top Chamfer | 8 mm | 0 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.