Mechanical parts
Adjustable Desk Lamp - 3 Laser-Cut Designs
- Bounding box
- 621.4 × 78.5 × 161 mm
- Engine
- 3D Printing B-rep
- Parameters
- 35
- Published
- November 1, 2026
Download
Free to download and use. See the terms.
The prompt
3 designs for an adjustible desk lamp with a lampshade which can be easily made with laser cutting and hinges.
Parameters
| Name | Value | Range |
|---|---|---|
| Spacing between the three lamps | 230 mm | 150 – 350 |
| Laser-cut sheet thickness | 5 mm | 3 – 8 |
| Base plate thickness | 6 mm | 4 – 12 |
| Arm / link width | 18 mm | 12 – 30 |
| Hinge bolt hole diameter | 4.4 mm | 3.2 – 6.5 |
| Hinge side clearance | 0.4 mm | 0.2 – 1 |
| Base A length | 90 mm | 50 – 140 |
| Base B length | 80 mm | 50 – 140 |
| Base C length | 70 mm | 50 – 140 |
| Base depth (shared) | 60 mm | 40 – 120 |
| Pin / hole clearance | 0 mm | 0 – 0.6 |
| Pin head oversize over hole | 3 mm | 1 – 6 |
| Pin head thickness | 1.6 mm | 1 – 3 |
| Pin tail protrusion | 2 mm | 0.5 – 6 |
| Rear pivot height | 26 mm | 16 – 45 |
| Lower arm length | 90 mm | 60 – 160 |
| Upper arm length | 70 mm | 50 – 140 |
| Lower arm elevation | 60 deg | 20 – 80 |
| Upper arm elevation | -20 deg | -45 – 20 |
| Shade top diameter | 38 mm | 24 – 70 |
| Shade bottom diameter | 85 mm | 50 – 140 |
| Shade height | 52 mm | 30 – 100 |
| Lower pivot height | 120 mm | 80 – 200 |
| Upper pivot height | 145 mm | 100 – 230 |
| Link length | 90 mm | 60 – 150 |
| Link elevation | -30 deg | -45 – 0 |
| Shade top diameter | 38 mm | 24 – 70 |
| Shade bottom diameter | 85 mm | 50 – 140 |
| Shade height | 55 mm | 30 – 100 |
| Pivot height | 55 mm | 30 – 90 |
| Arm length | 95 mm | 60 – 150 |
| Arm elevation | 22 deg | 5 – 60 |
| Shade top size | 30 mm | 20 – 60 |
| Shade bottom size | 80 mm | 40 – 130 |
| Shade height | 45 mm | 25 – 90 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.