Jigs and fixtures
64mm Water Chamber - Perimeter Serpentine Flow Around Open Fin Field
- Bounding box
- 80.0 × 64.0 × 16.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Apply the user's red-marked concept: inlet at upper-left, broad perimeter serpentine guides, central heatsink fin field left free of divider walls, water accesses fins near edges, outlet at lower-right, protruding hollow tubes. This is a conceptual parametric model with generic heatsink fins pending actual sink measurements.
Parameters
| Name | Value | Range |
|---|---|---|
| Chamber outer size | 64 mm | 50 – 90 |
| Clear cavity height | 12.5 mm | 8 – 16 |
| Base floor thickness | 2 mm | 1 – 4 |
| Lid thickness | 1.5 mm | 1 – 3 |
| Wall thickness | 3 mm | 2 – 5 |
| Heatsink footprint | 40 mm | 30 – 45 |
| Heatsink height proxy | 11 mm | 6 – 13 |
| Proxy fin thickness | 0.8 mm | 0.5 – 1.5 |
| Proxy fin count | 12 mm | 8 – 20 |
| Tube outside diameter | 6 mm | 4 – 8 |
| Tube inside diameter | 4 mm | 2.5 – 5 |
| Tube protrusion | 8 mm | 5 – 15 |
| Flow-guide thickness | 2 mm | 1.5 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
