Mechanical parts
6-inch column bracket — forward-facing strap groove
- Bounding box
- 38 × 153.7 × 124 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 12, 2026
Download
Free to download and use. See the terms.
The prompt
Reverse ratchet strap recess on raised 1-inch tab to face forward while preserving uninterrupted curved back flush against 18.144-inch column. Full six-inch shelf arm, Bambu A1/P1S.
Parameters
| Name | Value | Range |
|---|---|---|
| Shelf depth | 152.4 mm | 100 – 190 |
| Column radius | 230.43 mm | 180 – 300 |
| Bracket width | 38 mm | 28 – 55 |
| Height to shelf top | 96 mm | 75 – 120 |
| Shelf arm thickness | 10 mm | 8 – 15 |
| Reinforcing rib thickness | 12 mm | 8 – 20 |
| Raised backing height | 28 mm | 27 – 35 |
| Backing thickness | 15 mm | 13 – 22 |
| Outer shelf lip | 7 mm | 4 – 12 |
| Strap groove height | 25.5 mm | 25 – 27 |
| Front-facing groove depth | 6 mm | 4 – 9 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.