Mechanical parts
5-Knuckle Split-Pin Butt Hinge
- Bounding box
- 65.0 × 40.0 × 8.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- September 28, 2026
Download
Free to download and use. See the terms.
The prompt
can u make it so the hinge isint going through making it 5 for i half but the other way
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length | 60 mm | 30 – 150 |
| Leaf width | 20 mm | 10 – 60 |
| Leaf thickness | 2 mm | 1 – 6 |
| Leaf edge fillet | 0.4 mm | 0 – 1.2 |
| Knuckle diameter | 8 mm | 4 – 20 |
| Knuckle count (odd) | 5 count | 3 – 15 |
| Centre knuckle owner (0 = leaf A, 1 = leaf B) | 1 - | 0 – 1 |
| Axial gap between knuckles | 0.4 mm | 0.1 – 3 |
| Radial clearance leaf to knuckle | 0.3 mm | 0.1 – 3 |
| Pin diameter | 3 mm | 1 – 10 |
| Pin head diameter | 6 mm | 2 – 16 |
| Pin head thickness | 2.5 mm | 0.5 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.