Brackets and mounts
4WD mobile robot smart car
- Bounding box
- 212.5 × 194 × 65 mm
- Engine
- 3D Printing B-rep
- Parameters
- 23
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
A precise 3D mechanical model of a 4WD mobile robot smart car, desert buggy style. It features a bright yellow modular outer chassis, a detachable black top roof panel, two ultrasonic sensors mounted on the front like eyes, four large black wheels with yellow rims, and a hollow internal compartment specifically designed to house an Arduino Uno and an 830-tie-point breadboard. Hard-surface industrial design, clean geometry, symmetrical, optimized for 3D printing and CAD conversion.
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis length | 200 mm | 180 – 220 |
| Chassis width | 150 mm | 130 – 170 |
| Chassis height | 45 mm | 30 – 70 |
| Wall thickness | 2.4 mm | 1.2 – 5 |
| Chassis edge round | 6 mm | 2 – 10 |
| Roof panel length | 180 mm | 160 – 200 |
| Roof panel width | 130 mm | 110 – 150 |
| Roof total height | 8 mm | 4 – 15 |
| Wheel diameter | 65 mm | 50 – 90 |
| Wheel width | 26 mm | 15 – 40 |
| Axle X distance from center | 70 mm | 50 – 90 |
| Axle height from ground | 32.5 mm | 25 – 45 |
| Wheel/chassis overlap | 4 mm | 0.5 – 8 |
| Sensor width along Y | 45 mm | 30 – 60 |
| Sensor depth along X | 20 mm | 10 – 30 |
| Sensor height | 15 mm | 8 – 25 |
| Transducer eye diameter | 12 mm | 6 – 18 |
| Arduino length | 68 mm | 60 – 80 |
| Arduino width | 53 mm | 45 – 60 |
| Arduino overall height | 15 mm | 8 – 25 |
| Breadboard length | 165 mm | 140 – 180 |
| Breadboard width | 55 mm | 45 – 70 |
| Breadboard height | 10 mm | 7 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and