Brackets and mounts
4in VoCore DDU – hooded, LED dash (v1)
- Bounding box
- 133.4 × 119.6 × 50.0 mm
- Engine
- Precision B-rep
- Parameters
- 35
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
Sim racing digital dash (DDU) enclosure for a 4" VoCore USB-C screen, in a hooded motorsport-dash style like a 7" dash: top LED row, side LEDs, hood over the top. Screen pocket, window, screw positions, hold-down blocks and Asetek mount ears carried over from the user's proven 4" enclosure.
Parameters
| Name | Value | Range |
|---|---|---|
| Screen pocket width | 96.4 mm | 90 – 105 |
| Screen pocket height | 57.5 mm | 52 – 65 |
| Viewing window width | 90 mm | 80 – 96 |
| Viewing window height | 55 mm | 45 – 57 |
| Window X offset | 2 mm | -4 – 4 |
| Front lip thickness | 2 mm | 1.2 – 4 |
| Body depth | 17 mm | 14 – 30 |
| Screen hold-down block length | 11.26 mm | 5 – 20 |
| Screw pilot diameter | 2.6 mm | 2 – 4.2 |
| Cable notch X | 39.5 mm | -40 – 45 |
| Body half width | 64 mm | 56 – 75 |
| Bottom edge (below centre) | 34.65 mm | 32 – 45 |
| Top edge (above centre) | 50 mm | 42 – 65 |
| Outer wall | 1.6 mm | 1.2 – 3 |
| Top wall | 3 mm | 2 – 5 |
| Corner radius | 4 mm | 1 – 8 |
| Top LED count | 15 | 6 – 16 |
| Top LED pitch | 6.94 mm | 5 – 16.7 |
| Top LED row height | 39.5 mm | 35 – 55 |
| LEDs per side | 3 | 1 – 5 |
| Side LED pitch | 13.88 mm | 5 – 20 |
| Side LED centre height | 0 mm | -20 – 20 |
| Side LED offset from centre | 56.5 mm | 52 – 70 |
| LED window size | 4.2 mm | 2.5 – 5 |
| LED cell size | 5.6 mm | 4 – 6.5 |
| LED cell depth | 2 mm | 1 – 5 |
| Hood overhang | 22 mm | 8 – 40 |
| Hood thickness | 3 mm | 2 – 5 |
| Side cheek thickness | 2.5 mm | 1.6 – 5 |
| Cheek bottom height | -6 mm | -30 – 30 |
| Hood front drop | 4 mm | 0 – 15 |
| Hood fit clearance | 0.2 mm | 0 – 0.6 |
| Back plate thickness | 3 mm | 2 – 5 |
| Controller pod X | -12 mm | -30 – 0 |
| Controller pod depth | 8 mm | 6 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and