Fittings and adapters
40 to 100 mm Pipe Spool with 25 mm Drain
- Bounding box
- 582 × 220 × 258 mm
- Engine
- 3D Printing B-rep
- Parameters
- 17
- Published
- November 21, 2026
Download
Free to download and use. See the terms.
The prompt
isometric drawing of pipe section, 40mm flange to pipe section to reducer 40mm to 100mm to 100mm pipesection with flange. the 100mm pipe section has a drain stub 25mm with flange.
Parameters
| Name | Value | Range |
|---|---|---|
| Outside diameter | 48 mm | 40 – 80 |
| Bore diameter | 40 mm | 25 – 70 |
| Length | 150 mm | 60 – 400 |
| Outside diameter | 114 mm | 90 – 160 |
| Bore diameter | 100 mm | 60 – 150 |
| Length | 300 mm | 100 – 800 |
| Flange diameter | 100 mm | 60 – 200 |
| Flange thickness | 18 mm | 8 – 40 |
| Flange diameter | 220 mm | 120 – 400 |
| Flange thickness | 22 mm | 10 – 50 |
| Concentric reducer length | 100 mm | 40 – 250 |
| Stub outside diameter | 33 mm | 20 – 60 |
| Stub bore diameter | 25 mm | 10 – 50 |
| Stub length below pipe | 80 mm | 30 – 200 |
| Drain flange diameter | 75 mm | 40 – 150 |
| Drain flange thickness | 14 mm | 6 – 30 |
| Position along 100 mm pipe (fraction) | 0.5 mm | 0.1 – 0.9 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Modular Pyramid Rod Section
Design a 3D-printable modular tubular rod section for a portable, modular Great Pyramid of Giza wireframe. DIMENSIONS: - External diameter: 30 mm. - Internal diameter: 22 mm. - Wa
Thorlabs SM1T2 Double-Male SM1 Adapter
I need a thorlabs SM1T2 adapter. Its an Sm1 to Sm1 adapter. The threading should be external
SM1 to SM1 Male-Male Adapter
I need an SM1 to SM1 threaded adapter. the treads should be external
Laminar Jet Hose Nozzle
I need a 3d printable hose lock compatible water nozzle which produces a laminar jet
Sticker roll spool
Units: mm. New separate part: a spool for one sticker roll, printed standing on its flange. Variables: liner_w = 50, core_d = 14, bore_d = 7.8, flange_d = 24, flange_t = 1.2, core_
