Mechanical parts
360° Base Robot Arm with Ball Gripper
- Bounding box
- 302.1 × 90.0 × 96.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- October 26, 2026
Download
Free to download and use. See the terms.
The prompt
build an arm robot based on 360 degree as base with a grab hand to pick a table ball
Parameters
| Name | Value | Range |
|---|---|---|
| Base Diameter | 90 mm | 60 – 140 |
| Base Height | 10 mm | 5 – 30 |
| Swivel Turret Diameter | 70 mm | 40 – 120 |
| Swivel Turret Height | 16 mm | 5 – 40 |
| Shoulder Column Diameter | 22 mm | 10 – 50 |
| Shoulder Column Height | 70 mm | 30 – 150 |
| Upper Arm Length | 120 mm | 60 – 250 |
| Forearm Length | 90 mm | 40 – 200 |
| Link Thickness (Y) | 16 mm | 8 – 40 |
| Link Height (Z) | 22 mm | 10 – 50 |
| Forearm Down Tilt | 20 deg | 0 – 60 |
| Elbow Pivot Boss Diameter | 32 mm | 15 – 60 |
| Wrist Pivot Boss Diameter | 28 mm | 12 – 50 |
| Gripper Palm Length | 14 mm | 6 – 40 |
| Finger Length | 40 mm | 15 – 80 |
| Finger Thickness | 8 mm | 3 – 20 |
| Finger / Palm Height | 16 mm | 6 – 40 |
| Target Ball Diameter | 40 mm | 10 – 80 |
| Grip Clearance | 2 mm | 0 – 8 |
| Base Rim Fillet | 1.5 mm | 0.5 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.