Brackets and mounts
3.5 LCD Case
- Bounding box
- 96 × 62 × 16 mm
- Engine
- 3D Printing B-rep
- Parameters
- 23
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
A rectangular enclosure case for a 3.5 inch Raspberry Pi LCD display, outer size about 96 × 62 × 16 mm. Inside it holds a PCB of 88 × 54 mm and 14 mm total stack thickness. The front opening is a rectangle of about 73 × 49 mm for the active display area, centered on the front face. Four M2.5 mounting bosses at the corners of the PCB, holes about 3 mm in diameter, inset about 3 mm from the PCB edges. Wall thickness 2 mm. Cutouts on the bottom edge for the HDMI port and the audio jack, on the top edge for two micro USB ports, and on one side for the power micro USB port. A slot on the top left for the flat cable. Ventilation slots on the back.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer width | 96 mm | 50 – 200 |
| Outer depth | 62 mm | 30 – 150 |
| Outer height | 16 mm | 8 – 60 |
| Side wall thickness | 2 mm | 1 – 5 |
| Display opening width | 73 mm | 40 – 120 |
| Display opening height | 49 mm | 30 – 100 |
| PCB length | 88 mm | 50 – 120 |
| PCB width | 54 mm | 30 – 100 |
| Boss hole diameter | 3 mm | 2.5 – 5 |
| Boss outer diameter | 6 mm | 4 – 10 |
| Boss hole inset from PCB edge | 3 mm | 2 – 8 |
| HDMI cutout width | 12 mm | 6 – 30 |
| HDMI cutout height | 4 mm | 2 – 10 |
| Audio jack cutout width | 6 mm | 4 – 20 |
| Audio jack cutout height | 3 mm | 2 – 8 |
| Micro USB cutout width | 8 mm | 5 – 20 |
| Micro USB cutout height | 3 mm | 2 – 8 |
| Flat cable slot width | 20 mm | 10 – 40 |
| Flat cable slot height | 1.5 mm | 1 – 5 |
| Vent slot length | 20 mm | 10 – 50 |
| Vent slot width | 2 mm | 1 – 6 |
| Vent slot spacing | 4 mm | 2 – 10 |
| Vent slot count | 4 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and