Mechanical parts
2205 12N14P outrunner, 3 mm shaft, 683 bearings
- Bounding box
- 27 × 27 × 20 mm
- Engine
- 3D Printing B-rep
- Parameters
- 8
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
12V brushless outrunner, 12N14P, 22 mm stator, 3 mm shaft, two 683 bearings
Parameters
| Name | Value | Range |
|---|---|---|
| Stator outer diameter | 22 mm | 18 – 28 |
| Lamination stack height | 5 mm | 3 – 10 |
| Tooth width | 2.2 mm | 1.5 – 3.5 |
| Air gap | 0.3 mm | 0.2 – 0.6 |
| Magnet thickness | 1.2 mm | 0.8 – 2.5 |
| Bell steel wall | 1 mm | 0.6 – 2 |
| Base flange diameter | 26 mm | 22 – 32 |
| Base flange thickness | 2 mm | 1.5 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.