Jigs and fixtures
20T Module 2 Spur Pinion
- Bounding box
- 44.0 × 44.0 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 5
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Single-piece standard straight-tooth involute spur pinion for a rack-and-pinion adjustment mechanism. Module 2 mm, 20 teeth, 40 mm pitch diameter, 20 degree pressure angle, 10 mm face width, 8 mm through bore. Units mm. Export STEP for Autodesk Fusion 360.
Parameters
| Name | Value | Range |
|---|---|---|
| Module | 2 mm | 2 – 2 |
| Number of teeth | 20 | 20 – 20 |
| Pressure angle | 20 deg | 20 – 20 |
| Face width | 10 mm | 10 – 10 |
| Shaft bore diameter | 8 mm | 8 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
