Enclosures and housings
Xiaomi 4 Compact Filter Chamber, centered on chassis deck
- Bounding box
- 240 × 246 × 236.2 mm
- Engine
- 3D Printing B-rep
- Parameters
- 44
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Filter chamber for Xiaomi Smart Air Purifier 4 Compact (175 x 171 mm) centered on the chassis deck origin, with the filter seat raised over the deck's 8 mm standoffs, a wall relief for the standoff under the wall, M3 ears matched to existing deck screw holes at (+/-105, -30), a detachable grille cap and a separate fan lid for the AVC DS08025T12U. Includes reference deck and fan models.
Parameters
| Name | Value | Range |
|---|---|---|
| Filter cartridge diameter | 175 mm | 160 – 200 |
| Filter cartridge height | 171 mm | 150 – 200 |
| Radial clearance around filter | 1.5 mm | 0.3 – 3 |
| Air gap between filter top and lid ledge | 3 mm | 1 – 10 |
| Wall thickness | 2.4 mm | 1.6 – 5 |
| Clearance under the filter for deck standoffs | 12 mm | 10 – 40 |
| Filter seat ring thickness | 3 mm | 2 – 6 |
| Filter seat overlap | 8 mm | 4 – 20 |
| Lid ledge overlap | 8 mm | 5 – 14 |
| Lid ledge thickness | 3 mm | 2 – 6 |
| Number of vertical vent slots | 24 mm | 8 – 40 |
| Vent slot width | 14 mm | 6 – 30 |
| Solid band at bottom and top of the filter zone | 12 mm | 6 – 30 |
| Deck screw hole X offset from deck centre | 105 mm | 90 – 118 |
| Deck screw hole Y offset from deck centre | 30 mm | 10 – 60 |
| 1 = two more ears at +Y (needs new holes in the deck) | 0 mm | 0 – 1 |
| Ear width | 16 mm | 12 – 24 |
| Base ear thickness | 5 mm | 4 – 8 |
| M3 clearance hole | 3.4 mm | 3 – 4.5 |
| M3 screw head counterbore diameter | 6.4 mm | 5.5 – 8 |
| Counterbore depth | 2.5 mm | 1.5 – 4 |
| Height of the deck standoffs | 8 mm | 4 – 20 |
| Clearance above the standoffs | 1.5 mm | 0.5 – 4 |
| Air gap between fan top and grille | 5 mm | 3 – 15 |
| Grille plate thickness | 4 mm | 3 – 8 |
| Grille slot width | 6 mm | 3 – 12 |
| Grille slot pitch | 10 mm | 7 – 18 |
| Solid rim around the grille | 12 mm | 6 – 30 |
| M3 screws holding the cap | 4 mm | 3 – 6 |
| Cap ear reach beyond chamber wall | 11 mm | 9 – 20 |
| Body top ear thickness | 10 mm | 8 – 14 |
| Cap ear thickness | 5 mm | 4 – 8 |
| M3 pilot hole in the body ears | 2.6 mm | 2.2 – 3 |
| Fan cable notch height under the cap | 8 mm | 5 – 14 |
| Fan frame size | 80 mm | 70 – 92 |
| Fan thickness | 25 mm | 10 – 38 |
| Fan screw hole spacing | 71.5 mm | 60 – 80 |
| Fan air opening diameter | 74 mm | 60 – 78 |
| Lid thickness | 8 mm | 6 – 12 |
| Fan locating rim height | 6 mm | 3 – 15 |
| Fan screw pilot hole | 3.4 mm | 2.5 – 4.5 |
| Fan cable slot width | 12 mm | 6 – 20 |
| M3 screws holding the lid | 3 mm | 2 – 6 |
| Lid M3 pilot hole | 2.6 mm | 2.2 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Oval Safety Snap Carabiner
Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
