Enclosures and housings
XIAO ESP32S3 Sense AA Battery Case Assembly
- Bounding box
- 110.0 × 55.0 × 41.5 mm
- Engine
- Precision B-rep
- Parameters
- 42
- Published
- August 21, 2026
Download
Free to download and use. See the terms.
The prompt
Design a CASE for Seeed Studio XIAO ESP32S3 Sense With a replacement lens OV5640 Camera for XIAO ESP32S3 Sense (With Heat Sink) And AA SMT batterijhouder SMD batterijdoosje AA batterijhouder 1 2 3 sleuven AA SMT batterij AA batterijen standaard houder voor PCB montage Important that there is a cover where we can replace the batteries simpel
Parameters
| Name | Value | Range |
|---|---|---|
| Body Length | 110 mm | 80 – 160 |
| Body Width | 55 mm | 40 – 100 |
| Body Height | 40 mm | 25 – 80 |
| Wall Thickness | 2.5 mm | 1.5 – 5 |
| Front Bay Length | 48 mm | 30 – 80 |
| Front Bay Width | 50 mm | 30 – 80 |
| Front Bay Depth | 34.5 mm | 20 – 60 |
| Rear Bay Length | 52 mm | 30 – 80 |
| Rear Bay Width | 48 mm | 30 – 80 |
| Rear Bay Floor Height | 17 mm | 10 – 30 |
| Cover Recess Depth | 3 mm | 1.5 – 5 |
| M2 Standoff Diameter | 5 mm | 3 – 8 |
| M2 Standoff Height | 5 mm | 2 – 15 |
| M2 Standoff Hole Diameter | 2.2 mm | 1.5 – 4 |
| Battery Rail Length | 44 mm | 30 – 60 |
| Battery Rail Width | 2.5 mm | 1 – 6 |
| Battery Rail Height | 2 mm | 1 – 5 |
| Battery Rail Spacing | 36 mm | 20 – 50 |
| Electronics Lid Length | 50 mm | 30 – 80 |
| Electronics Lid Width | 55 mm | 40 – 80 |
| Electronics Lid Thickness | 3 mm | 1.5 – 6 |
| Lens Cutout Diameter | 20 mm | 10 – 40 |
| Lens X Offset | 10 mm | -20 – 25 |
| Lens Y Offset | 0 mm | -20 – 20 |
| USB-C Notch Depth | 2.5 mm | 1.5 – 8 |
| USB-C Notch Width | 10 mm | 6 – 20 |
| USB-C Notch Y Offset | 0 mm | -20 – 20 |
| Ventilation Slot Length | 12 mm | 5 – 25 |
| Ventilation Slot Width | 2 mm | 1 – 5 |
| Ventilation Slot Count | 6 mm | 2 – 12 |
| Ventilation Slot Spacing Y | 5 mm | 2 – 10 |
| Ventilation Region X Offset | -5 mm | -20 – 20 |
| Battery Cover Length | 55 mm | 30 – 80 |
| Battery Cover Width | 55 mm | 40 – 80 |
| Battery Cover Thickness | 3 mm | 1.5 – 6 |
| Finger Grip Length | 20 mm | 5 – 40 |
| Finger Grip Width | 10 mm | 5 – 25 |
| Finger Grip Height | 1.5 mm | 0.5 – 5 |
| Locking Tab Length | 8 mm | 3 – 20 |
| Locking Tab Width | 3 mm | 1.5 – 6 |
| Locking Tab Height | 2 mm | 1 – 5 |
| Locking Tabs Per Side | 2 mm | 1 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox