70.070.07.0
Loading the interactive model…
Interactive 3D model of X-Frame Quadcopter Body

Brackets and mounts

X-Frame Quadcopter Body

1 views
Bounding box
70.0 × 70.0 × 7.0 mm
Engine
Precision B-rep
Parameters
15
Published
November 21, 2026

Download

Free to download and use. See the terms.

The prompt

3D CAD Design Specification: X-Frame Quadcopter Body Design a compact, symmetrical X-shaped quadcopter main body as one continuous, integrated solid structure. 1. Overall Dimensions - Overall footprint: 70 × 70 mm (maximum tolerance ±1 mm). - Main body thickness: 3 mm. 2. Central Frame - Rectangular frame with an unobstructed inner opening of 40 × 30 mm. - Longitudinal rails: 3 mm wide. - Transverse rails: 2 mm wide. - Outer dimensions: 44 × 36 mm. 3. Four Diagonal Arms - Arrange four arms symmetrically in an X configuration, with adjacent arms 90° apart. - Arm width: 2 mm. - Arm thickness: 3 mm. - Straight-side lengths: 9.26 mm and 11.26 mm, excluding curved reinforcement regions. - Preserve these straight-side dimensions exactly. 4. Motor Mounts - Four circular motor mounts, one at each arm end. - Outer diameter: 11 mm. - Through-hole diameter: 7 mm. - Main body thickness: 3 mm, plus 4 mm additional height upward. - Total motor-mount height: 7 mm. - Keep the mounting holes open through the entire height. 5. Concave Curved Reinforcements - Add smooth, inward-bending concave curved reinforcements at the central-frame and motor-mount connections. - Central-frame corner reinforcements: radius 5 mm. - Motor-mount connection reinforcements: radius 10 mm. - Apply the curves symmetrically. - Ensure smooth transitions without sharp corners or abrupt edges. - Reinforcement thickness must remain 3 mm, with no additional upward height. - Do not interfere with the motor mounting holes. 6. Structural Requirements - The entire frame, arms, reinforcements, and motor mounts must form one continuous, watertight, manifold solid. - No disconnected parts, gaps, overlapping internal faces, or self-intersections. - Preserve the central opening and all four motor-mount holes. 7. Final Output Provide the completed 3D model with top, side, and isometric views, along with the final STL file. Important: Follow the specified dimensions and geometry precisely. Do not independently redesign, simplify, or omit any structural feature.

Parameters

NameValueRange
Overall footprint70 mm60 – 90
Main body thickness3 mm2 – 6
Frame outer X36 mm30 – 50
Frame outer Y44 mm35 – 55
Central opening X30 mm20 – 34
Central opening Y40 mm25 – 42
Arm width2 mm1.5 – 5
Arm short straight side9.26 mm5 – 15
Arm long straight side11.26 mm6 – 18
Arm diagonal angle45 deg35 – 55
Motor mount outer diameter11 mm8 – 16
Motor through-hole diameter7 mm4 – 9
Motor mount height above body4 mm1 – 8
Frame reinforcement radius5 mm2 – 8
Motor reinforcement radius10 mm6 – 14

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

X-Frame Quadcopter Body - Free CAD Model (STEP, STL) | TextoCAD