Brackets and mounts
X-Frame Drone Main Body
- Bounding box
- 75.6 × 75.6 × 3 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
Main Body of a Small Drone (3D Design) Design a simple, symmetrical, X-shaped main body for a small drone. The structure must be a single solid structure, meaning all components must be permanently connected to one another. 1. Central Frame - The central section must be rectangular. - Its internal length must be 40 mm and its internal width must be 30 mm. - The width of the two side rails along the length must be 3 mm. - The width of the other two side rails must be 2 mm. 2. Four Arms - Four arms must extend outward from the central frame in four directions. - The arms must be arranged symmetrically in an X-shaped configuration. - The angle between any two adjacent arms must be 90°. - The width of each arm must be 2 mm. - All four arms must be connected to the central frame as a single solid structure. - The arms must not originate from the corners. Instead, each arm must be attached slightly before the corresponding corner. - The centerline of each arm must extend outward from the center of the central frame. 3. Arm Length The distance from the inner edge of the central frame to the endpoint of each arm must be 20 mm. This distance must be measured up to the endpoint of the arm, not to the center of the motor mount. 4. Motor Mounts Four circular motor mounts must be placed at the endpoints of the four arms. Dimensions of each motor mount: - Outer diameter: 11 mm - Inner diameter: 7 mm - Wall thickness: 2 mm All four motor mounts must have identical dimensions and remain connected to their respective arms. 5. Structural Height The total thickness or height of the entire structure along the Z-axis must be 3 mm. 6. General Design Requirements - The entire structure must be compact, simple, and symmetrical. - The central frame and all four arms must form a single solid body. - All four motor mounts must also be integrated into the main structure. - The design must be created as a 3D CAD model. - Both the Top View and 3D Isometric View of the design must be clearly visible.
Parameters
| Name | Value | Range |
|---|---|---|
| Internal frame length | 40 mm | 20 – 100 |
| Internal frame width | 30 mm | 15 – 80 |
| Side-rail width along length | 3 mm | 1.2 – 6 |
| End-rail width | 2 mm | 1.2 – 6 |
| Overall structure height | 3 mm | 1.5 – 6 |
| Arm width | 2 mm | 1.2 – 6 |
| Inner edge to arm endpoint | 20 mm | 5 – 60 |
| Motor mount outer diameter | 11 mm | 6 – 30 |
| Motor mount wall thickness | 2 mm | 1.2 – 5 |
| Arm-to-mount overlap | 1 mm | 0.5 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
