Wooden Controller Stand

A rectangular wooden base with rounded corners. Approximate dimensions: 150 mm wide, 115 mm deep, and 18 mm thick. At the rear of the base, add an angled support approximately 75 mm high that holds the controller upright. Tilt the support backwards by approximately 10–15 degrees. Add a low wooden front lip to prevent the controller from sliding forward. Shape the support so the left and right controller grips remain unobstructed. The controller must sit securely and remain upright in the stand. Add a cable channel through the base for a USB-C charging cable. Position the USB-C cable opening centrally at the rear or bottom of the stand so the cable can connect to the controller's USB-C charging port. Provide sufficient clearance around the USB-C opening for the connector and cable. Round all external edges with approximately a 3–5 mm radius. The design should be suitable for manufacturing from solid wood or CNC-machined MDF. Keep the design simple and make all components part of one coherent, editable CAD model. Use a realistic wooden product design, while keeping all geometry precise and parametrically editable. Do not add a PlayStation logo or other trademarks to the stand. The final design should resemble a modern wooden phone/controller dock: a wide wooden base with an angled support that securely holds a DualSense controller upright while allowing it to charge

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.