Enclosures and housings
Wooden Bed Headboard
- Bounding box
- 1700 × 50 × 1300 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric 3D CAD model of a wooden bed headboard made of individual components for a DIY project assembly. The assembly consists of the following parts: 1. Main Panel: 12 horizontal wooden planks stacked vertically. Each plank is 1600mm long, 95mm wide, and 20mm thick. The total height of this panel stack is 1140mm. 2. Back Supports: 4 vertical support battens attached to the back of the main panel. Each batten is 20mm thick, 30mm wide, and 1140mm long, matching the exact height of the panel stack. 3. Outer Frame and Legs: A 3-sided frame enclosing the main panel (left, right, and top). The frame is made of 50x50mm square timber. The left and right side posts are 1300mm long, acting as both frame sides and legs that extend down to the floor. The top piece connects them with 45-degree miter joints at the upper corners. Ensure all components are generated as distinct parametric solids so their dimensions can be adjusted with sliders. The components should be aligned perfectly to form a single cohesive headboard assembly.
Parameters
| Name | Value | Range |
|---|---|---|
| Plank length / panel width between posts | 1600 mm | 800 – 2400 |
| Plank width, one board of the stack | 95 mm | 50 – 200 |
| Plank thickness | 20 mm | 10 – 40 |
| Number of stacked horizontal planks | 12 mm | 3 – 30 |
| Chamfer on the plank long edges | 1.5 mm | 0.5 – 4 |
| Panel set-back behind the frame front | 5 mm | 0 – 20 |
| Number of vertical support battens | 4 mm | 2 – 8 |
| Batten width | 30 mm | 15 – 80 |
| Batten thickness | 20 mm | 10 – 40 |
| Square side-post timber size | 50 mm | 30 – 100 |
| Square top-rail timber size | 50 mm | 30 – 100 |
| Post length, floor to top of headboard | 1300 mm | 600 – 2200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,