Brackets and mounts
Wooden Ballpoint Pen (No Clip)
- Bounding box
- 10.0 × 10.0 × 140.0 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise 3D model of a wooden-style ballpoint pen based on the attached reference photograph. The pen should have a simple, elegant cylindrical design with no clip. Exact dimensions: * Total length: 140 mm * Main cylindrical body: 114 mm long, 10 mm diameter * Rear end cap: 9 mm long, 7 mm diameter * Front tapered section: 16 mm long, gradually narrowing from the 10 mm body diameter to the tip * Pen tip: 1 mm long * Total front assembly: 17 mm Shape and design details: 1. The main body must be a perfectly straight cylinder with a diameter of 10 mm and a length of 114 mm. 2. The rear end cap must be located at the back of the pen, measuring 9 mm long and 7 mm in diameter. It should connect smoothly to the main body. 3. The front section must gradually taper from the main body’s 10 mm diameter into a narrow pointed pen tip. The transition should be smooth and natural, without a sudden step or sharp shoulder. 4. The pen tip should be very small, measuring 1 mm in length, and seamlessly connected to the tapered front section. 5. Remove the clip completely. There must be no clip, attachment, ornament, hole, or extra protrusion on the pen body. 6. Keep the entire pen symmetrical along its central longitudinal axis. 7. The design should resemble the wooden pen in the reference photo, with a minimal, smooth, rounded cylindrical appearance. 3D modeling requirements: * Create a single solid, watertight, manifold 3D printable model. * No floating parts or disconnected geometry. * Smooth transitions between all connected sections. * No textures, colors, wood grain, or decorative lettering. * Ensure the overall length is exactly 140 mm. * Ensure the main body diameter is exactly 10 mm. * Optimize the model for FDM 3D printing. * Export as an STL file. Create the model with accurate dimensions rather than a merely visual approximation. Use millimeters as the unit system.
Parameters
| Name | Value | Range |
|---|---|---|
| Barrel Length | 114 mm | 60 – 160 |
| Barrel Diameter | 10 mm | 6 – 20 |
| Rear Cap Length | 9 mm | 3 – 25 |
| Rear Cap Diameter | 7 mm | 3 – 9.5 |
| Front Taper Length | 16 mm | 5 – 40 |
| Tip Section Diameter | 2.6 mm | 1.2 – 6 |
| Pen Tip Length | 1 mm | 0.5 – 6 |
| Writing End Diameter | 1 mm | 0.4 – 3 |
| Blend Radius | 1 mm | 0.2 – 1.4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
