Enclosures and housings
Wireless Mouse Enclosure (Exploded)
- Bounding box
- 395 × 65 × 38.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 31
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
Create a **wireless computer mouse enclosure** with a smooth, ergonomic, symmetrical shape. Dimensions: - Length: 115 mm - Width: 65 mm - Maximum height: 38 mm - Wall thickness: 2 mm - Rounded outer edges and corners Include: - Left and right mouse buttons separated by a 1.5 mm gap - Central scroll-wheel opening measuring 12 mm wide and 28 mm long - A small DPI button opening behind the scroll wheel - Flat bottom surface - Optical sensor opening on the bottom - USB receiver storage compartment on the bottom - Battery compartment for one AA battery - Removable bottom battery cover - Four shallow recesses for mouse-glide pads Do not add a cable or cable opening. The model should represent a wireless mouse. Create the enclosure as separate top and bottom parts and arrange them next to each other for 3D printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 115 mm | 20 – 250 |
| Width | 65 mm | 20 – 150 |
| Maximum height | 38 mm | 20 – 80 |
| Wall thickness | 2 mm | 0.8 – 6 |
| Corner radius | 16 mm | 4 – 40 |
| Bottom shell height | 18 mm | 8 – 40 |
| Button split gap | 1.5 mm | 1 – 4 |
| Button split length | 55 mm | 20 – 100 |
| Wheel opening length | 28 mm | 10 – 50 |
| Wheel opening width | 12 mm | 6 – 30 |
| Wheel opening X position | 19.5 mm | -40 – 50 |
| DPI opening length | 7 mm | 4 – 20 |
| DPI opening width | 5 mm | 3 – 15 |
| DPI opening distance behind wheel | 6 mm | 2 – 20 |
| Sensor opening length | 12 mm | 6 – 30 |
| Sensor opening width | 10 mm | 4 – 20 |
| Sensor opening X position | 27.5 mm | -50 – 50 |
| USB receiver slot length | 18 mm | 10 – 40 |
| USB receiver slot width | 14 mm | 8 – 30 |
| USB receiver slot X position | 10 mm | -50 – 50 |
| USB receiver slot Y position | -16 mm | -30 – 30 |
| Glide pad recess length | 20 mm | 10 – 40 |
| Glide pad recess width | 10 mm | 6 – 25 |
| Glide pad recess depth | 0.6 mm | 0.2 – 1 |
| Battery cover length | 55 mm | 30 – 80 |
| Battery cover width | 25 mm | 15 – 40 |
| Battery cover thickness | 2 mm | 1 – 6 |
| Battery cover clearance | 0.3 mm | 0.1 – 1 |
| Battery opening X position | -10 mm | -50 – 50 |
| Finger notch depth | 0.8 mm | 0.4 – 1.5 |
| Exploded layout gap | 155 mm | 120 – 300 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no