Enclosures and housings
Wireless Charger Enclosure with Smoothed Rail Entries
- Bounding box
- 140 × 94 × 29.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 25
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
Smooth and round both exposed rail ends at the open phone insertion end. Remove the small projecting hooks, notches and sharp corners visible at the rail tips. Blend each retaining lip smoothly into a rounded rail end. Use approximately 1 mm edge fillets where the material thickness permits, reducing the radius locally if necessary. Add a gentle rounded lead-in to help the phone slide into the rails. Preserve the 88 mm clear phone opening, 12.5 mm clearance beneath the retaining lips and the retaining function farther along the rails. Keep the overall length at 140 mm and all other features unchanged.
Parameters
| Name | Value | Range |
|---|---|---|
| Base external length | 140 mm | 80 – 250 |
| Base external width | 94 mm | 94 – 94 |
| Base height | 13 mm | 5 – 50 |
| Base wall thickness | 2 mm | 1.2 – 5 |
| Base floor thickness | 2 mm | 1.2 – 5 |
| Exterior corner radius | 6 mm | 1 – 20 |
| Opening length along side wall | 14 mm | 14 – 14 |
| Opening height | 4 mm | 4 – 4 |
| Distance from bottom-right external corner to nearest edge | 50 mm | 50 – 50 |
| Gap above inside floor surface | 1 mm | 1 – 1 |
| Lid plate length | 140 mm | 80 – 250 |
| Lid plate width | 94 mm | 94 – 94 |
| Lid plate thickness | 2 mm | 1.2 – 6 |
| Locating lip wall thickness | 1.5 mm | 1.2 – 4 |
| Locating lip height below lid | 4 mm | 1 – 12 |
| Clearance per side to base opening | 0.2 mm | 0.1 – 0.5 |
| Clear opening between rail inner faces | 88 mm | 88 – 88 |
| Rail side wall thickness | 3 mm | 3 – 3 |
| Clear height beneath retaining lips | 12.5 mm | 12.5 – 12.5 |
| Retaining lip inward overhang | 3 mm | 1 – 8 |
| Retaining lip thickness | 2 mm | 1.2 – 5 |
| Bottom rail wall depth | 3 mm | 3 – 3 |
| Bottom corner smoothing height reference | 6 mm | 2 – 20 |
| Open rail tip edge fillet radius | 1 mm | 0.5 – 1.5 |
| Rounded retaining lip lead-in length | 10 mm | 4 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,