Brackets and mounts
Wireless Charger Enclosure with Phone Rails
- Bounding box
- 160 × 94 × 29.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 23
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
Increase the charging enclosure’s external width from 90 mm to 94 mm. Make the phone holder opening 88 mm clear between the rails’ inner side faces, with each rail side wall 3 mm thick. Keep 12.5 mm clear beneath the retaining lips. Preserve the retaining lips, rounded entry edges and bottom stop. Resize the base, lid and locating lip together to maintain their fit and 0.2 mm clearance per side. Keep the enclosure 160 mm long and 15 mm thick when closed, excluding the projecting phone rails. Preserve the charging port’s size and position.
Parameters
| Name | Value | Range |
|---|---|---|
| Base external length | 160 mm | 80 – 250 |
| Base external width | 94 mm | 40 – 150 |
| Base height | 13 mm | 5 – 50 |
| Base wall thickness | 2 mm | 1.2 – 5 |
| Base floor thickness | 2 mm | 1.2 – 5 |
| Exterior corner radius | 6 mm | 1 – 20 |
| Opening length along side wall | 14 mm | 14 – 14 |
| Opening height | 4 mm | 4 – 4 |
| Distance from bottom-right external corner to nearest edge | 50 mm | 50 – 50 |
| Gap above inside floor surface | 1 mm | 1 – 1 |
| Lid plate length | 160 mm | 80 – 250 |
| Lid plate width | 94 mm | 40 – 150 |
| Lid plate thickness | 2 mm | 1.2 – 6 |
| Locating lip wall thickness | 1.5 mm | 1.2 – 4 |
| Locating lip height below lid | 4 mm | 1 – 12 |
| Clearance per side to base opening | 0.2 mm | 0.1 – 0.5 |
| Clear opening between rail inner faces | 88 mm | 50 – 120 |
| Rail side wall thickness | 3 mm | 1.2 – 8 |
| Clear height beneath retaining lips | 12.5 mm | 5 – 25 |
| Retaining lip inward overhang | 3 mm | 1 – 8 |
| Retaining lip thickness | 2 mm | 1.2 – 5 |
| Bottom stop depth | 8 mm | 3 – 20 |
| Bottom stop height | 6 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl