Enclosures and housings
Wireless Charger Enclosure with 6mm Rails
- Bounding box
- 140 × 100 × 33 mm
- Engine
- 3D Printing B-rep
- Parameters
- 27
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
Increase the wall thickness of both side rails and the bottom rail from 3 mm to 6 mm. Thicken them outward, preserving the 88 mm clear phone width and 16 mm clear depth beneath the retaining lips. Widen the enclosure, lid and base together as needed so their outer faces remain flush with the rails. With 6 mm walls on each side, the overall width should be 100 mm. Keep the continuous U-shaped rail, smooth rounded ends, existing retaining-lip overlap, lid fit and charging port. Keep the overall length at 140 mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Base external length | 140 mm | 80 – 250 |
| Base external width | 100 mm | 100 – 100 |
| Base height | 13 mm | 5 – 50 |
| Base wall thickness | 2 mm | 1.2 – 5 |
| Base floor thickness | 2 mm | 1.2 – 5 |
| Exterior corner radius | 6 mm | 1 – 20 |
| Opening length along side wall | 14 mm | 14 – 14 |
| Opening height | 4 mm | 4 – 4 |
| Distance from bottom-right external corner to nearest edge | 50 mm | 50 – 50 |
| Gap above inside floor surface | 1 mm | 1 – 1 |
| Lid plate length | 140 mm | 80 – 250 |
| Lid plate width | 100 mm | 100 – 100 |
| Lid plate thickness | 2 mm | 1.2 – 6 |
| Locating lip wall thickness | 1.5 mm | 1.2 – 4 |
| Locating lip height below lid | 4 mm | 1 – 12 |
| Clearance per side to base opening | 0.2 mm | 0.1 – 0.5 |
| Clear opening between rail inner faces | 88 mm | 88 – 88 |
| Rail side and bottom wall thickness | 6 mm | 6 – 6 |
| Clear depth from phone resting surface to underside of retaining lips | 16 mm | 16 – 16 |
| Retaining lip inward overhang | 3 mm | 1 – 8 |
| Retaining lip thickness | 2 mm | 1.2 – 5 |
| Bottom rail wall depth | 6 mm | 6 – 6 |
| Bottom corner smoothing height reference | 6 mm | 2 – 20 |
| Open rail end fillet radius | 1 mm | 0.4 – 1.5 |
| Rounded phone entry lead-in length | 10 mm | 4 – 18 |
| Retaining lip end taper length | 5 mm | 5 – 5 |
| Shorten side rails from open top end | 4 mm | 0 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,