Enclosures and housings
Wireless Charger Enclosure (Exploded)
- Bounding box
- 340 × 90 × 13 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
Create a two-piece hollow enclosure for a wireless phone charger, suitable for FDM 3D printing. Use millimetres. The assembled external dimensions must be exactly 160 mm long × 90 mm wide × 15 mm high. Base: - External dimensions: 160 × 90 × 13 mm. - Wall thickness: 2 mm. - Floor thickness: 2 mm. - Open at the top, with an internal opening of 156 × 86 mm. Lid: - Flat plate measuring 160 × 90 × 2 mm. - Add a continuous rectangular locating lip underneath the lid. - Lip external dimensions: 155.6 × 85.6 mm. - Lip wall thickness: 1.5 mm. - Lip extends 4 mm below the underside of the lid. - Join the lip securely to the lid plate. - The lip slides inside the base opening with 0.2 mm clearance on each side. - The lid plate rests on the base rim, giving a total assembled height of 15 mm. Use gently rounded exterior corners. Match the lip and opening corner profiles so they fit without interference and maintain the clearance. Create the base and lid as separate solid parts. Show them beside each other, with their flat exterior faces on the build plate and their openings or lips facing upward for printing without supports. Keep the dimensions editable. Do not add cable holes, screw holes, internal supports, or decorative features yet.
Parameters
| Name | Value | Range |
|---|---|---|
| Base external length | 160 mm | 80 – 250 |
| Base external width | 90 mm | 40 – 150 |
| Base height | 13 mm | 5 – 50 |
| Base wall thickness | 2 mm | 1.2 – 5 |
| Base floor thickness | 2 mm | 1.2 – 5 |
| Exterior corner radius | 6 mm | 1 – 20 |
| Lid plate length | 160 mm | 80 – 250 |
| Lid plate width | 90 mm | 40 – 150 |
| Lid plate thickness | 2 mm | 1.2 – 6 |
| Locating lip wall thickness | 1.5 mm | 1.2 – 4 |
| Locating lip height below lid | 4 mm | 1 – 12 |
| Clearance per side to base opening | 0.2 mm | 0.1 – 0.5 |
| Gap between exploded parts | 20 mm | 5 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,