Enclosures and housings
Wireless Charger Enclosure (Assembled, Capsule Cable Slot)
- Bounding box
- 160 × 90 × 15 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
Change the charging port opening in the base’s right-hand side wall to a capsule shape: a straight slot with semicircular ends. Make it 14 mm long along the side wall × 4 mm high, with 2 mm radius ends. Keep its nearest edge exactly 50 mm from the bottom-right external corner, measured along the case’s 160 mm length. The opening should extend from 50 mm to 64 mm. Keep it centred vertically within the base’s 13 mm height and cut fully through the wall. Keep all other dimensions unchanged.
Parameters
| Name | Value | Range |
|---|---|---|
| Base external length | 160 mm | 80 – 250 |
| Base external width | 90 mm | 40 – 150 |
| Base height | 13 mm | 5 – 50 |
| Base wall thickness | 2 mm | 1.2 – 5 |
| Base floor thickness | 2 mm | 1.2 – 5 |
| Exterior corner radius | 6 mm | 1 – 20 |
| Opening length along side wall | 14 mm | 3 – 40 |
| Opening height | 4 mm | 1 – 10 |
| Distance from end corner to nearest edge | 50 mm | 5 – 150 |
| Lid plate length | 160 mm | 80 – 250 |
| Lid plate width | 90 mm | 40 – 150 |
| Lid plate thickness | 2 mm | 1.2 – 6 |
| Locating lip wall thickness | 1.5 mm | 1.2 – 4 |
| Locating lip height below lid | 4 mm | 1 – 12 |
| Clearance per side to base opening | 0.2 mm | 0.1 – 0.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,